Very Effective Filtration
Proper Filtration Will Give the Operator Years of Trouble Free,
Dependable Service from All Components of the Divider Block Systems.
Delta-P installed on MW-62 White Superior)
Overview
Dirt or foreign material of any form cannot be tolerated.....and will cause serious damage to all lubrication system components. If contamination does not cause immediate problems, it will greatly reduce the expected life of all components of the divider block system, cause phantom shutdowns and premature failure of compressor components.
Delta-P Filter Adapter
| Play a clip about the Delta-P Filter from the Product Video. |  |
The Delta-P Filter adapter filters lubricant through a 25 micron filter on the low pressure feed prior to the suction manifold on the high pressure pump assemblies. Filtering the lubricant prior to the pumps will keep debris from damaging the high pressure system components. The dual gauges provide an easy way for the operator to determine when to change the filter, based on rising differential pressure.
Replace the filter at 10 PSI differential
High Pressure In-Line Filter
| Play a clip about the High Pressure Filter from the Product Video. | |
The High Pressure In-Line Filter with a bronze filter element removes contamination from the lube oil supply to protect system components. Filtered luberication supplies improve divider block reliability and the filter element itself is easy to change. Note that the 509052 as shown here is being replaced with the new Stainless Steel 809052K High Pressure Filter seen below.
High Pressure Inline Filter with washable element
High pressure in-line filter with washable stainless steel element for compressors in high H2S or acid gas service. Note that the 2255 as shown here is being replaced with the new Stainless Steel 809052K High Pressure Filter seen below.
Stainless Steel High Pressure Filters
The new S.S. filter housing is not affected by harsh environments (offshore salt environment or high concentrations of H2S gas) like the Aluminum filter housing, so it can be used for all compressor divider block system applications and all applications for our new chemical injection divider block systems.
Benefits
- The new S.S. element comes in 10 and 25 micron
- ENVIRONMENT: Element is not affected by H2S as the old bronze element. Even if the crankcase has oil saturated by H2S, this new element and housing will continue to filter the oil and keep the compressor operating at peak efficiency. The old sintered bronze element deteriorated when it was exposed to H2S and plugged completely causing the compressor to shut down from lube no flow.
- FILTER AREA: The new S.S. pleated element has over 6 times the filtering area compared to the old sintered bronze element in all competitors filters which means we have extended the life of the element and reliability of the compressor. Now we will recommend changing the filter element every 2 years in place of one year.
- WASHABLE FILTER ELEMENT: Although we do not recommend washing any filter element, if the end users compressor goes down due to a plugged filter element, this new S.S. pleated element can be washed with a air gun and cleaning fluid and replaced in the housing to keep the compressor running until a new element can be ordered and installed.